Computer-aided design
This homework week we must design something design relate our project. I confess that becomes in a nightmare. Because I am bachelor in computer science and I do not know nothing about design. But this homework was the perfect challenge. I did not try to become in a professional artist, but I did the best with my little knowledge about design. This work was divided in four sections:
Sections
- Basic Sketch
- 3D design
- Face sketch
- Project: glass 3D design
Basic Sketch
My level of drawing is like a children so I found a tutorial to draw animals in
this link and
take a llama image for this site.
I had not idea how to create curve with a 2d graphic software . So I decide to use Krita software.
Then, we replied the first page of tutorial in Krita. After that I create two layers in new project, in one
of layer I import the llama image. Bezier were turning hard but I followed the edge of drawing with lines and curves.
The first image belong here represents the process to complete the final sketch that is showed belong here.
You can download the source in krita in this link.
3D design
Face skecth
My idea is to put a glasses on the llama head, the glasses carry a phone which can process the image from its frontal camera. Also, this phone simulate the llama eyes. The next image represent my idea.
I took a tutorial tutorial on youtube, I learned how to draw a cartoon with Bezier tool. The same methodology I applied to draw llama from my sketch image. This sketch is a mix image from a Kangaroo with glases and llama. My drawing is not perfect because I drew meanwhile I was traveling in the bus.
The idea was importing the sketch to Inkscape to draw curves with Bezier tool over it. This process took some minutes to complete because the bezier curve was hard to take control. But I can do it and add color in its nose.
Project: glass 3D design
