Step 1
i wanted to make an Ipad stand by covering a 3D printed shape wtih carbone fiber and Epoxy
I designed in Tinkercad a shape to cover
.stl filei wanted to make an Ipad stand by covering a 3D printed shape wtih carbone fiber and Epoxy
I designed in Tinkercad a shape to cover
.stl filePrinted on Ultimaker2 / ABS / Brim / 50mm/s / 0,30 layer / 0,8mm Nozzle
I needed Epoxy (Data Sheets), plastic gloves, masks, cutter, cisors, brushs, and a dirty wood board.
I glued my 3D ptinted shape on the board with double sided tape to fix it
Then i glued a plastic film all over the shape
I cut a sheet of carbon (mask and gloves must be used)
I started preparing the resin mix (Mask must be used)
For dangers and quantities, please red the data sheet of your own product
I choosed to wheight the resins, 100g resin for 39g catalyst
I've been advice to glue in first place a kind of fabric. But i haven't found yet the name an the precise role of it.
finaly i covered evcerything with the carbon.
I used a cutter to cut all arounf the platic shape bellow, and finaly i now have a nice carbon Ipad stand