Overview of my final project
This is the final project video. Showing most of the steps I did for my final project.
Final Project Video from BirkirThor on Vimeo.
Week 1 - Final project proposal
Week 19 - Final project documentation
Week 1 - Link to a final project proposal
Week 2 - Design the Guitar in Inkscape and then Fusion 360
Week 4 - Make a FabISP programmer to program my boards
Week 5 - 3D print the guitar pickup riser
Week 12 - Making the guitar strap buttons, molding and casting
Week 13 - Make a touchpad and connect it with RGB LED board (test for the final project), Input Devices
Week 15 - Connecting the RGB LED boards and make them talk with each other (not the final boards)
Week 17 - Bill of materials for my final project
Week 19 - Working on the guitar; sanding, painting, screw it together, installing the materials (pickup, bridge, tuning machines etc ...) and lasercutting the plexi. Designing-, making- and programming the circuit boards.
Week 20 - Presentation summary slide
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Fretboard_Test - Right click to download
Fretboard.stl - Right click to download
Guitarbody.stl - Right click to download
Guitar.svg - Right click to download
Guitarbody.svg Mill - Right click to download
Guitarbody.pdf Mill - Right click to download
Guitarneck with holes .stl - Right click to download
Guitarneck with no holes .stl - Right click to download
Plexi Laser 600x300 .svg - Right click to download
Plexi Laser 600x300 .pdf - Right click to download
Plexi Back .stl - Right click to download
Plexi Back .svg - Right click to download
Plexi Inkscape .svg - Right click to download
Plexi.stl - Right click to download
Mandala .pdf - Right click to download
Misty Logo .svg - Right click to download
FINAL PROJECT BOARDS:
Master Interior - Right click to downloadContact me!
Swing by for a cup of , or send me a message :)