links&resources
w#2
w#3
w#4
- fabISP files
- AVRDude
- fabISP Firmware
- Arduino Software
- Crosspack AVR
- Andy Bardagjy's fabISP - 'the Original'
w#5
- ● the hexagon object, orig. Rhino5 file
- ● the hexagon object, stp-file
- ● the hexagon object, stl-file
- ● the test cube, orig. Rhino file
- ● the test cube, stp
- ● the test cube, stl
- ● Sense Software download site
- ● scanned Optimus Prime, ply-file
w#6
- ● the original Eagle.files, zip-archive
- ● designspark, electrical CAD software by RS-online, free (only Windows)
- ● MultiSim Blue, electrical CAD software by Mouser, free (only Windows)
- ● opensource elctrical CAD (several Linux Dis. / Windows/ OSX)
- ● the Datasheet for the ATMEL AVR ATtiny 44 family
w#7
w#8
- ● the ATtiny 44 Datasheet
- ● the c code for the push button
- ● the c code for the push blinking
- ● the Sublime Editor
- ● the Arduino Homepage
w#9 & #11 & Resources
- ● Fresnel solar cooker design
- ● Wikipedia - Parabolic Reflectors
- ● Advantages of fresnel lenses
- ● the xy-table for Fusion
- ● the xy-table as STEP file
- ● the Lensholder for Fusion
- ● the Lensholder as Step file
- ● the Antiwobble-Pin for Fusion
- ● the Antiwobble-Pin as STEP file
- ● the slide bearings for Rhino3D
- ● the slide bearings as STEP file
w#10
- ● Arduino sketch for Output device
- ● Daniele Ingrassia's Satshakit
- ● satshakit_evo EAGLE pcb board design
- ● satshakit_evo EAGLE schematics design
w#12
- ● My Classring orig. Rhinofile
- ● Datasheet Silicone Protosil RTV 245 with Hardener RTV 245 B1
- ● Datasheet Behnke Epoxy
- ● Datasheet Behnke Hardener B1 - beware that this is the same data sheet as the one for the epoxy. The information are included
w#13
- ● the Datasheet for the DHT11 Humidity sensor
- ● The Datasheet for the LCD 1602 Series
- ● The Datasheet for the LCD 2004A Series
- ● A good site with HowTo's arduino/compatibles sketches
- ● I2C ADDRESS SCANNER FOR ARDUINO/FABDUINO
- ● KS_satshakit_evo EAGLE pcb board design
- ● KS_satshakit_evo EAGLE schematics design
- ● Here is the Arduino sketch for this assignment
w#14
- ● ... here is the CAD file for the Notebookstand
- ● Datasheet Behnke Epoxy
- ● Datasheet Behnke Hardener B1 - beware that this is the same data sheet
w#15
- ● The original files/sketches from Nicholas Zambetti
- ● The sketch for the master device
- ● The sketch for the slave device
- ● KS_satshakit_evo EAGLE pcb board design
- ● KS_satshakit_evo EAGLE schematics design
w#16
- ● The Sketch for the IOdevice - c code
- ● The Sketch for the IOdevice - Arduino sketch
- ● the python code for the graph and serial read
- ● the matplotlib.org website
Final Project
- ● the complete working file as Rhino & Step files
- ● Motorsuspension Section Rhino & Step files
- ● Central Connector Plate Rhino & Step files
- ● Ringstructure Extender Rhino & Step files
- ● HyMCo Flightcontroller Board - Eagle files
- ● Home of MultiWii
This work is licensed under a
Creative Commons
Attribution-NonCommercial-ShareAlike 4.0 International License.