My Work

• self balancing bot (segway) with Arduino,2x1000watt motors , handmade mosfet H-bridge , 2x12v batteries in parallel.

 

• 4 ch. dock speaker with a built-in amp 50 watt x4 so powerfull , works with 14.8 volts battery 5000mah lipo cells works 3 hours on full audio volume.

 

• Bldc motor ducted fan jet engine driven by an ESC 20 amps with a 12 volt battery 13 ah . This jet contains 2 fans fixed on the motor axe , and has 2 stator fans . The motor can reach 15000 rpm or more .. it has powerful thrust force that allows me to put it in my next rc jet plane project.

 

• robotic worm arm moving automatically , driven by 2 servo motors.

 

• ultrasonic robot (obstacle avoiding robot) with 4 ultrasonic sensors , arduino , 2 dc motors , H-bridge.

 

• 4 RC car tires , glued together with two speakers and 2 channel amp , too powerful.

 

• i used a 3D printed water jet and designed a boat made of acrylic , brush-less motor 1200kv and 50 amp esc , 3s lipo battery , soon i'll test it with 6s lipo.

 

• thats my home made wide lens that can be mounted on sony NEX-C3 16mm lens , some changes can be made that makes it mounted on any lens less than 18mm type , that lens changes the 16mm to 12mm aprox. , the other lens is fish eye lens about 150 degree 8mm .

 

• electric goKart homemade in egypt testing.

 

• Rc plane designed by me and made by cutting foam after printing the design to scale on papers.

 

• Foam fighter with the ducted fan jet i made before.

 

• Using laser cutter i made gears for a clock with the standard ratios from acrylic.