Final Project Name

for now i have an idea for the final project but maybe i'll change it in the future .

intro:

Nowadays communications for ROVs under water is so hard , they use optics(lasers) or use ordinary wires for transmitting data to the robot or using a floating antenna which also will use a wire to transmit the data from the antenna in the air medium to the water medium, also they use sound wave for data .

I used to work in an organisation for underwater protection in the red sea , i was a technical support there , i made a hydrophone which is a device that can hear sounds of dolphins and whales from far distance , so the idea of transmitting data by sound wave audible or non audible can be done.

The idea:

Making a transmiting and recieving device for controlling ROV robot wirelessly , and the Robot itself as a submarine for taking photos and videos for the natural life under the sea.

Main purpose:

To make the submarine small, dive and float quickly , aslo has a live feed camera with night vision capiblity and sensors for aquiring data , and remote controlled wirelessly.

Also i decided to make it from recycled parts and handmade parts, with the help of 3D printing and laser cutting.

Main target:

Very low cost , making it with water jet engine as in the jet skis that can provide higher speed to go to the target ( i 3D printed the engine before in that video and worked soo nice ), Diving and Surfacing by buoyancy .