COMPOSITES
1. Design in the program SOLIDWOIRK.
2. Perform the cut in the program SRP Player.
3. Create the path with a tool 1/8 ball.
4. We make the cut.
5. Fiber cut in a suitable size.
6. Mix the resin (Silicone Rubber Compound OOMOO) and put on the fiber.
7. You put the mixture on the piece.
8. We put them in a bag.
9. Sealing the bag.
10. We made a hole and took all the air out with a vacuum cleaner.
11. Sealing the bag it again and let stand for 4 hours.
12. We open the cover bag
13. We cut the excess fiber.
14. Separate the fiber and the piec
