06.ELECTRONICS DESIGN
Mar 3, 2016
This week I made an echo hello-world board. The assignment is redraw it. And add (at least) a button and LED (with current-limiting resistor), check the design rules, and make it.
But it was too difficult for me...;( So,I will work hard at practice.
[Tool]
Software :Eagle (MacOSX) > Fabmodule (ubuntu)
CNC Milling machine : Roland MODELA MDX-20
[Data]
Schematic data: test_2_160309.sch
Board data: test_2_160309.brd
04-1. Eagle setup
04-2. Schematic design
04-3. Board Design
04-4. Assemble
The data I used are these.Data > cutout: work06_160309_cutout.png, trace: work06_160309_trace.png