A project plan is a formal document designed to guide the control and execution of a project. A project plan is the key to a successful project and is the most important document that needs to be created when starting any business project.
In IT, the term project plan refers to a a Gantt chart or any other document that displays project activities along a timeline. However, considering these documents alone as a project plan is inaccurate. These particular documents can be more precisely termed as project schedules, and may be considered only a part of the actual project plan.
A project plan is used for the following purposes:
It will get the data from sensors and display on the screen which is viewed on the reflector plate,and also i was also thinking to future development to get the data from the Easy Tester
I have got the idea of making the Fab Data Glass from the Instructables Project Called Arduino Data Glass for Multimeter by Alainsprojects which is the device getting the data from a commerical multimeter and giving the data to the glass.i was very intrested to fabricate my own well integrated system.
Most of the componenets are available from Fab inventory and some extra capacitors,resistors and transistors,OLED's i had to purchase locally.and i have ordered some small OLED from ALI EXPRESS
~20$
The whole project was divided into four different sections
For each of the processes different parts will be there which are listed below.
Electronic Design and fabrication
Mechanical Design and Fabrication
Embedded programming
Integration and packaging
I am planning to use the following process in each section for making FAB DATA GLASS
Electronic Design and fabrication
Mechanical Design and Fabrication
Integration and packaging
I am preparing a shedule for the whole project and is mentioned below, As if now i am started the designing of the PCB and ordered the components from Hyderabad,bangalore and China. The remaining task needs to be completed as per the schedule.
As the time duration for the project is limited , i am planning to add the basic features only. I have planned to just show the data from the sensors infornt of the eye using a reflector
FAB DATA GLASS Work Schedule
| Sl.No | Activity | Sheduled date | Status |
|---|---|---|---|
| 1 | Components collection | 28 May 2017 | completed on 01 June 2017 |
| 2 | PCB designing | 05 June 2017 | Completed on 10 June 2017 |
| 3 | PCB Milling and soldering | 07 June 2017 | Completed on 12 June 2017(Design error and milled second time) |
| 4 | Programming and Testing | 10 June 2017 | Completed on 13 June 2017 | 5 | Case Design and 3D printing | 12 June 2017 | Completed on 17 June 2017 | 6 | Integration & Testing | 14 June 2017 | Completed on 17 June 2017 | 7 | Carry Case design and fabrication | 16 June 2017 | Completed on 18 June 2017 | 8 | Documentation and poster making | 17 June 2017 | Completed on 18 June 2017 |
The FAB DATA GLASS is a Smart glass, .
so it could be assessed in stages,
There could be a basic level:
That would be the minimum 3points to pass.
Then extra
features could be evaluated:
Finally super extra points
if any of these
conditions are met:
In future the development of the project can be found at the public repo on the git hub here I belive i can build a good low cost easy to acess smart messeage reader in future using this same device i will be able to continue the product development after the fab academy.
Do not underestimate the value of this assignment. For me its very importance with the product. This is the documentation of your final project, fabbers should be able to replicate your project with your notes, and it is not only addressed to the people who doesn't know anything about it. It is also for you. They say that your memory has no limits but in a year you probably won't remember most (if any at all) of the details. Also, documenting is not a one shot process. It is a continuous and iterative process. I keep adding, removing and modifying content all the time till I am satisfied (which actually, never occurs).
inspired Source for above words are our instructors guru FRANCISCO© 2017, made with by scitechindian
This work done by SYED JUNAID AHMED is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.