Assignment for week 1
Build a personal site in the class archive describing you and your final project
Planning final project for academy
Link to this week home assignment page
Assignment Fo Week 2
Model a 3d design of the final project and post it on class page
Model a 2d design for the final project
Link to this week home assignment page
Assignment Fo Week 3
1.Design, make, and document a press-fit construction kit
2.Get familiar with parametric design tools
3.Learn how to use the laser cutter and the vinyl cutter Use cardboard!
4.The press-fit construction kit should make up more than one form
Assignment for week 4 Electronic Production
1.Make the FabISP in-circuit programmer
2.Mill the board
3.Solder the components on the board
4.Set it up for programming
Assignment for week 5 3D Scanning and Printing
1.design and 3D print an object (small, few cm) that could not be made subtractively
2. 3D scan an object (and optionally print it)
Assignment for week 6 Electronics Design
1. Redraw the echo hello-world board
2.Add (at least) a button and LED (with current-limiting resistor)
3.Check the design rules, and make it
Assignment for week 7 Computer controlled cutting
2.Use one sheet of sheet of plywood- 15mm thick,1220 x 2440 mm
Assignment for week 8 Embedded programming
1. read a microcontroller data sheet
2.program your board to do something, with as many different programming languages and programming environments as possible
Assignment for week 9 Mechenical Design
2.Including the end effector
Assignment for week 10 Mechenical Design
2.Including the end effector
Assignment for week 11 Input Devices
1. This week challenge is to create and program a board that measures something.
Assignment for week 12 Molding & Casting
1. This week challenge is to create a Mold.