3D printed parts

website version1.0

I have started with the making of the leafbot parts. I have designed the joints of the tilting mechanism and the support of the rear wheels. The parts are printed with 2 mm outside shell and 60% fill. The material is Colorfab PLA. The printspeed is 50%. The parts are printed with now support material. The parts are designed to be printed without support material

The detail view of the print process of the distance bushes of the brushes and the fixations blocks for the brushes

The total overview of the printed parts. All have been printed on the Ultimaker 2 with the same material and settings.