Materials, tools and software
Plaster (Materials)
Water (Materials)
Shopbot (Tools)
Solidworks (software)
 |
 |
 |
 |
|---|
|
|
|
|
|
|---|
Plaster (Materials)
Water (Materials)
Shopbot (Tools)
Solidworks (software)
To begin, I use this assignment to change the production in our ceramic workshop.
The first production process in the workshop is design the piece for make a molding and casting process. (All process is hand make)
The change in the process. I use the CAD CAM process to make the design of the piece and this take to make the mold in the shopbot.
In solidworks make the piece and take all measurements for the mold
For the preparation. I calculate the volume of the block of the plaster in ceramic
For a problem with the schedule of the machine we can`t finish but we can make the first file in the machine with is a experimentation with the material.
For a problem with the schedule of the machine we can`t finish but we can make the first file in the
machine with is a experimentation with the material.
To finish this, I can make the mold to make the prototype in ceramic process.
In this assignment, I do this experimentation to apply to my ceramic workshop, this form I delete the
matrix of the production process and decreases one week the time of production line.
To make the clay production, I put the material in the mold and control because the mold absorbs the water of the material and the ceramic take the form of the mold when do you take the correct thickness extract the piece formed. I make two pieces and join to form the total piece.
the relate information to the three items at the top of the document
this assignment is very importat because is a realy important improvement for our workshop
