ASSIGNMENTS 2

Computer - aided Design

2D Design

Autocad 2016

I started designing in CAD programs, at 2D level with the software Autocad 2016. I started by making straight lines with circumferences to form a pinion.

Finally complete the design according to the shape of the pinion and complete the design of its gear, although being 2d design still does not prove that it engages tangentially.

Click here for download the file in AUTO CAD

Corel Draw X7

The second program for 2D that uses Corel Draw X7 where you also make a pinion, for this start by configuring the dimensions of pages that will work.

Then start my design with "line 2 points" and start designing the base of the pinion.

After finishing designing the pinion, I finally continued designing the gear that should fit in the teeth, for this use the tools like line type, dimension, angle, rotate of the software workbar.

Click here for download the files in COREL DRAW

3D DESIGN

Autodesk Inventor 2016

I started by downloading and installing the Autodesk Inventor Software, then I opened the software.

Inventor Autodesk allows you to design in different systems of units, I chose ISO-mm, because I decided to design in units to millimeters.

Then, start designing the initial measurements of my project, using the tools "Line", "Circle", "Rectangle", "Project Geometry", and tabien dimensioning the measurements with "Dimension".

Also, use the "Work Plane" tool to make 3D view sections for in-plane layouts.

And finally , this is my desing 3D in Inventor.

But , in Inventor Autodesk you can get the views in 2D layout through the "Drawing" template.

Click here for download the files in INVENTOR AUTODESK

TinkerCAD

Tinkercad is a 3D design program online, to start you must create an account.

You start the design with simple figures that are the base of your design.

Then, using the tools "Group" or "Desgroup" you can get the holes , adding or subtracting figures

And, finally this is my design in TinkerCAD

SOLIDWORKS

I started, download and install the software with the license granted by the FabAcademy.

I opened the software SOLID WORKS 2016

The design starts with the sketch, for that we use 2D tools for example "Circle" , " Line", " Curve" and others.

Then, it starts with the 3D design using, with the tools " Extrude ", " fillet ", " Chamfler ".

I using " fillet " tools for better 3D finish.

And , finally this is my desing in SOLIDWORKS.

Click here for download file in SOLIDWORKS

BACK