Its a great feeling to reach Week-19, well a few quick final Project Development Assignemt questions answered here in this page and in the end, I have provided the links to my Poster presentation , Video presentation and final Project development documentation.

What is the Deadline? How much time do you have left?

My final presentation for fab is over and the next deadline I have is to deploy the system to a standard lab facility in Trivandrum,from where the distribution of drinking water is done for the Trivandrum Corporation, I will have to deploy it by the third week of July after final Internal calibration of sensors.

What tasks need to be completed? What tasks remain?

The development of the complete system is completed and the following alone remains,

1. Final calibration of the sensors.

2. Automatic water filling and draining mechanism for remote depolyment.

How will you complete the remaining tasks in time?

I need to design a water level sensing mechanism, I have the ultrasonnic sensors in mind for this. This also needs to be integrated to the system before deployment, This I hope to complete in another couple of days.

What has worked?

All the hardware modules explained so far is working perfectly, you can watch them on the video presentation.

What hasn't worked?

To my goodfortune all the modules are working fine, but I would like to integrate the two hardware boards I have in the system to one single board, but ofcourse in a modular fashion itself after I finalize the product.

What questions still need to be resolved?

The waspmote sensors used are pretty expensive and I would like to find a less costly solution to this so that a highly acceptable hot selling commercial product for common man can be made out of this platform.

MY Final Project Presentation & Documentation

Here is the link to my final Poster presentation.

Here is the link to my final Video presentation.

Here is the link to my final Project documentation.