Follwoing table depicts the current status of things Amitraj Deshmukh, has been working on, under Fabacademy 2014. This page will be updated at least once a week.
-- Last update: May 21, 2014 14:10 (IST)
|
Index |
Work Type |
Work Item |
Status |
Notes |
|
1 |
Logistic |
Installation of Fabmodules |
Completed |
Details: Ubuntu 13.04, 64 bit |
|
1.1 |
|
Modela through Fabmodules |
Completed |
|
|
1.2 |
|
Vinyl Cutter through Fabmodules |
Completed |
|
|
1.3 |
|
Laser Cutter through Fabmodules |
Pending |
As of now, an external vendor is helping us laser cut the designs. |
|
2 |
Project |
|
|
|
|
2.1 |
|
Project Finalisation |
Completed |
Name: Wired Digital Hearing Aid |
|
2.2 |
|
Project Plan |
In Progress
|
|
|
3 |
Assignments |
|
|
|
|
3.1 |
|
Animation |
Completed |
Using
Sketchup |
|
3.2 |
|
Design using inkscape |
In
Progress |
Main parts of the design are completed. However, the interfacing joints are yet to take the final shapre. |
|
3.3 |
|
Laser Cutting of an object |
Completed |
|
|
3.4 |
|
FabISP Milling |
Completed |
|
|
3.5 |
|
FabISP Component Placement |
In
Progress |
FabISP PCB has been completed, but yet to use it successfully. FabISP did get programmed, however, it is to be used yet. |
|
3.6 |
|
Vinyl Cutting |
Pending |
I will be able to complete this assignment, may be tonight itself (May 21) |
|
3.7 |
|
3D Scanning |
Completed |
The scanned and edited object is not 3D Printed |
|
3.8 |
|
3D Modelling |
Complete
|
A printable 3D Box has been completed and uploaded. |
|
3.9 |
|
Electronics Production – Schematic and board |
Completed
|
Using Eagle a schematic of Echo_Hello_World ckt has been produced. Routing has been made by hand (no auto routing used). |
|
3.10 |
|
Electronics Production – Milling and component placement |
Completed |
Using Eagle
a schematic of Echo_Hello_World ckt has been produced. Routing
has been made by hand (no auto routing used). |
|
3.11 |
|
Programming – try out various programming languages (C, ASM, Forth)
|
Pending |
I will be able to complete this assignment by May 22, 2014. |
|
3.12.1 |
|
Molding |
Completed |
Mold has been completed using a Locally available molding rubber, which takes around 4 days to dry out completely, in a dry environment. |
|
3.12.2 |
|
Casting |
In Progress |
As the mold is ready now, I plan to start casting with Instamold or PoP, whichever is available today (May 21, 2014). |
|
3.13 |
|
Embedded Programming |
Complete |
Code for A blinking LED has been written and tested successfully. |
|
3.14 |
|
Input Devices |
In
Progress |
Components placed and PCB working. To write a useful demonstrative program that would show how inout device (a humidy sensor) is working. |
|
3.15 |
|
Notes |
In
progress |
Added 3 notes on Milling, Mercurial and Blender. This will keep happening. |
|
3.16 |
|
Composites |
Pending |
A mold design, in blender has been completed. However, selecting a composit and using it for making a mold is yet pending. |
|
3.17 |
|
Output Devices |
Completed |
|
|
3.18 |
|
Make a Machine |
Pending |
This seems to be not going to get completed, looking at the remaining time. |
|
3.19 |
|
Networking |
Pending |
This, I will be able to complete. |
|
3.20 |
|
Application Interface with I/O Device |
Pending |
This, I will be able to complete. |
Software Tools/resources used uptill now:
1) Web development - Libre Office, Kate, GIMP
2) Documentation: Libre Office
3) Object Designing - inkscape, Sketch up
4) Animation – Sketch up
5) CAMM Tool: Fabmodules
6) PCB Design Tool: Eagle
7) 3D Modeling: Blender 2.69, Meshlab, netfabb basic 5.1.0
8) Conferencing Tool: Ekiga, Jabber Video
9) Operating Systems – Ubuntu 13.04, 64 bit, Windows XP, 32 bit
.... to be continued
Hardware Tools/resources being used:
.... to be continued