For this week assignment I've been inspired by last students exercise here in Opendot. Gianluca and pierluigi used their satshakit to set a serial communication between thei computers.
I included the SoftwareSerial library to properly compile the sketch...
...and settled properly all the wire connections, using USB for Arduino, FTDI for Satshakit, and pin 10 and 11 for their connection.
I run the program on arduino (COM5) and everything went properly...
...than trying the same on the satshakit (COM4) I recieved a connection error
I checked wires, probably some of them were not steady fixed.
But It gave me another error "avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00"
This is very srange, my satshakit worked properly since yesterday. I changed nothing but now it seems there is no way to fix the connection. I than started surfing the web for a solution, I tryed everything with no luck. What I need could be either a new FTDI or a new satshakit :(
IDE sketch chat
HOME