Week12 - 3D moulding and casting

volcano

Introduce

At first,I didn’t realize I should use CNC and design the 3D model by myself.So I found a volcano and printed it.After that I designed a stamper by myself,and used a CNC machine to mill it.

Volcano

I found the 3D module here Mt. St. Helens

Mixed A(Urethane Mold compound) and B(Rubber Mold compound)

Pour over prepared model and let it cure to a soild,flexible rubber mold

Waiting for a day,and take out the model

Pour the liquid wax into rubber mold cavity and let cure

Demold the wax volcano

Kindle the wax volcano

volcano

Use CNC to Milling a stamper

Design the Mold and output as .stl

Fabmoudle or Modela Player

At First,I try to use Fabmoudles,but the fabmoudles without response while processing the file.And the classmate told me I can use the Modela Player instead of fabmoudles

Setting the Material

We select the wax as Material,so we choose the “Modeling Wax”

Create Process Creation

Choose the “Surfacing” at first,and than choose “Roughing”

Setting the original point

Find a smooth surface and set an original point

Output to the Roland SRM-20

Milling the wax

Take off the stamper

Light my volcano

Put the stamper on it

Take off the stamper!

File Download

St_Helens
M


This work is licensed under a Creative Commons Attribution 4.0 International License.

文章目录
  1. 1. Introduce
  2. 2. Volcano
    1. 2.1. Print the volcano - The Mt. St. Helens
    2. 2.2. Mixed A(Urethane Mold compound) and B(Rubber Mold compound)
    3. 2.3. Pour over prepared model and let it cure to a soild,flexible rubber mold
    4. 2.4. Waiting for a day,and take out the model
    5. 2.5. Pour the liquid wax into rubber mold cavity and let cure
    6. 2.6. Demold the wax volcano
    7. 2.7. Kindle the wax volcano
  3. 3. Use CNC to Milling a stamper
    1. 3.1. Design the Mold and output as .stl
    2. 3.2. Fabmoudle or Modela Player
    3. 3.3. Setting the Material
    4. 3.4. Create Process Creation
    5. 3.5. Setting the original point
    6. 3.6. Output to the Roland SRM-20
    7. 3.7. Milling the wax
    8. 3.8. Take off the stamper
    9. 3.9. Light my volcano
    10. 3.10. Put the stamper on it
    11. 3.11. Take off the stamper!
    12. 3.12. File Download
,