Assignment 17

Задание 17


In which I give a lot of info about my final project

В котором я выдаю много информации по финальному проекту



What I'm going to do

Что я собираюсь сделать

So, I got a commercial order from my department to make an art object represanting the number pi. The requirements were: it should be big and have a university logo.

В общем, я получил коммерческий заказ от своей кафедры на создние арт-объекта, отображающего число пи.

Polytech logo


What was done before

Что было сделано до этого

One of our universities spin off companies, Photomechanics, specializes in making turntables, so I had a lot in common with them but I also had to make a table on which electricity would be provided so I had to borrow some experience (and electrical parts) from desigers of tea kettles who have already made a high current rotating contacts. Another thing is that I wanted to apply my 2.5D milling experience: make a spherical place for a steel ball.

Одна из образовавшихся в университете компаний, Фотомеханика, специализируется на изготовлении поворотных столов, так что у меня есть много точек соприкосновения с их проектами, но мне надо было сделать стол с электрическими составляющими на поворотной части, так что мне надо было позаимствовать опыт дизайнеров чайников и некоторые детали, так как они уже реализовали такое решение. Также мне хотелось применить свои навыки в 2.5D фрезеровке, чтобы изготовить сферические посадочные места под шары.

List of components and components

Список материалов и компонентов

Name Purpose Price per project (1 USD = 67 RUB)
Plywood - a lot Turntable, stand, numbers, university logo, lightbox, mockup 147$
Plexiglass 1500x1500 mm LED cover on turntable and logo 60 $
White LED, 60 diodes/meter, 14.4 Watt/meter, 5050 smd diode type x20m Lights 120$
25 mm bearing ball x12 Turntable 10$
Textolite FR1 200 x 200 mm LED controller, capacitive touch sensor 5$
AtTiny45 x1 LED controller, capacitive touch sensor 4$
12V to 5V converter x1 LED controller, capacitive touch sensor 1$
12V 400W Power supply x1 LED controller, capacitive touch sensor 40 $
Transistor x1 LED controller 0.5$
Teakettle x1 Current collector 10$
12V DC motor x1 LED controller, capacitive touch sensor 100$

List of nodes, technologies and dates

Список узлов и технологий

Node Technology Due date
Stand Milling July, 1st
Digits Milling July, 1st
Letter Pi Milling, laser cutting July, 5th
Turntable Milling, laser cutting July, 10th
Sensor Milling July, 18th

Lapser, Gleb Miroshnik, Fab Academy 2016

Lapser, Глеб Мирошник, Фаб Академия 2016