- 3DsMAX: 3DsMAX Is a professional software to make the 3D model and animation.
- Sketchup: Sketchup is a fast modeling software developed by Google Corporation.
- Rhino3D: Rhino is a very good parametric design software, specializes in the design of complex surfaces.
My major is architecture design, 3DsMAX and Sketchup are all my commonly used software. I also tried the rhino3d this time, when I made a curved surface model, the rhino showed a very amazing convenience. But this time I chose to use the sketchup. Because the I like to use a straight line to do the design and my final project basically designed by the straight line. Also sketchup could make the 3D model faster and take less Computer memories that would improve the efficiency of my work.
3dsmax's interface
Sketchup's interface
Rhino3D's interface
This is the design of my remote control robot. At first I made a dynamic system by tire and track, then I made the cockpit and weapons. It seems to be very complicated but in fact, It doesn't take too much time to make it. Most of the 3D models are push from the 2D graphics.
When I making the same parts, I used the association tool and the Symmetry tool. After I completed the model, I used the material bar on the right side. Through the material bar "B", you can give a material to model, and adjust the material effect, you can also use the external image as a material.
After I set the material for every parts. I input the data in lumion and export a video. LUMION is a real-time rendering software commonly used in architecture.
In the end, I use the free editing software Aijianji to edit the video.
The date is big, so I put it in a external link
