Documentation
Scanning a Solid Figurine with the Next Engine/Scan Studio:
Completed Scanned and Printed Figurine:
Rhino Designed Non-subtractive Printed Objects in PLA (gray with the Z18) and AVS (white with the Form1) Filaments:
Group Test Print:
- - 4 hrs to print
- - 2 mils
- - limitations
- - .044"
- - no fine clearance
- - .095 distortion of cone as well as curved
- - 10% fill
- - clean raft removal; not as clean supports
Group Test PLA Print from different angles: