<B>Wide Plastic Gull Wing Small Outline Package</B> >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE >NAME LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE <B>Wide Plastic Gull Wing Small Outline Package</B> <b>RESISTOR</b> <b>RESISTOR</b><p> wave soldering LED 1206 pads (standard pattern) LED1206 FAB style (smaller pads to allow trace between) 5mm round through hole part. >NAME ATtiny45 >NAME >VALUE (Black) (Green) LED >NAME >VALUE <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces LED <b>Jumpers</b><p> <author>Created by librarian@cadsoft.de</author> <b>JUMPER</b> >NAME >VALUE JUMPER >NAME >VALUE <b>JUMPER</b> Generated from <b>Madre metronomo.sch</b><p> by exp-lbrs.ulp >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE 1 >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE 1 <b>CAPACITOR</b> <b>PIN HEADER</b> non-polarized capacitor >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.