Week04. Computer controlled cutting

This week, the practice of parametric modeling process in group assignment.
I made press fit kit.

1. Research in Group assignment

We determined the appropriate offset value for press fitting using cardboard.

1-1. Envilonment

1-2. Measure offset value

First, We talked about how we understand. Decided to use a generator.

2.52.552.62.652.72.752.82.852.92.953

As a result of combination, it was judged that 2.6 mm is suitable.

Combination

Next, we cut out a rectangle of 50 mm outside and 30 mm inside, and confirmed whether the size has changed

Frame1
Frame2
Frame3

We calculated that the cutting width of the laser is about 0.3 mm.

2. Laser Cutter

By group assignment, we found the proper offset. Based on that, create a parametric pressfit kit design.

2-1. Make Pressfit kit

Sketch…

  • PressFitKit1
  • PressFitKit1

Extrude & Fillet

  • PressFitKit2

Export SVG with Shaper Utilities

  • PressFitKit3

Cut & Assemble

  • A good example to fail if make it without thinking.
  • PressFitKit4

Take2

Sketch…

  • PressFitKit5
  • PressFitKit5

Extrude & Fillet

  • PressFitKit6

Export SVG

  • PressFitKit7

When to bend Which direction to cut.

Cut

  • Top cut in the vertical direction, bottom cut in the horizontal direction
  • PressFitKit8
    • When objects are too close together, sparks will burn.

Assemble

  • Those cut in the horizontal direction made a circle cleanly.
  • Another cut in the vertical direction broke halfway.

  • PressFitKit9

3. Vinyl Cutter

Try SandBlast In Fablab Kannai.

3-1. Design

The sandblasting design is as follows.

  • Design

    Logo

    Pattern

  • Create CutPattern with SilhouetStudio

    • Insert Logo & Pattern
      Insert
    • Trace Design Trace
    • Generate CutPattern SilhouetStudio
  • Cut…

  • Textured
    texture

  • SandBlast
    blastme

    blast

  • Finish
    Finish

4. Files