32M1-A Micro Lead Frame package (MLF) >NAME >VALUE Thin Plasic Quad Flat Package Grid 0.8 mm >NAME >VALUE >NAME >VALUE >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL SMD CRYSTAL Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF >NAME >VALUE OMRON SWITCH >NAME >VALUE 1 2 3 4 RESISTOR chip >NAME >VALUE RESISTOR >NAME >VALUE 5 mm, round >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE 1 2 >NAME >VALUE >NAME >VALUE SMD CRYSTAL Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF OMRON SWITCH Developed by element14 : element14 CAD Library consolidation.ulp at 30/04/2012 16:26:10 >NAME >VALUE >VALUE >NAME Capacitor 1206 <h3>SparkFun Electronics' preferred foot prints</h3> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >Name >Value RESISTOR chip >NAME >VALUE >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE >NAME >VALUE >Value >Name >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME Resistor Basic schematic elements and footprints for 0603, 1206, and PTH 1/10th watt (small) resistors. Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Header 1 Standard 1-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex Connectors <author>Created by librarian@cadsoft.de</author> KK® 254 Solid Header, Vertical, with Friction Lock, 2 Circuits, Tin (Sn) Plating<a href =http://www.molex.com/pdm_docs/sd/022232021_sd.pdf>Datasheet </a> >NAME >VALUE KK® 254 Solid Header, Vertical, with Friction Lock, 2 Circuits, Tin (Sn) Plating<a href =http://www.molex.com/pdm_docs/sd/022232021_sd.pdf>Datasheet </a> >NAME >VALUE >NAME .100" (2.54mm) Center Header - 2 Pin Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE CON-M-1X5-200 >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER CON-M-1X5-200 PIN HEADER PIN HEADER PIN HEADER PIN HEADER PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE PIN HEADER PIN HEADER PIN HEADER PIN HEADER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE SOT 23 >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces <h3>SparkFun Special Function ICs</h3> This library contains ICs that do not really fit into the other, more generic categories. Basically, anything that serves some function but has a bunch of brains or special bias circuitry that prevents it from being used as a general part qualifies for this category. Contents: <ul><li>555 timers</li> <li>LED drivers</li> <li>H-Bridge drivers</li> <li>Motor drivers</li> <li>Waveform generators</li> <li>Crypto</li> </ul> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >Name >Value Toshiba 1A dual motor driver IC-09363 JST XH Connector Long Pads (Package) Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 2 Created by Rembrandt Electronics www.rembrandtelectronics.com >NAME >VALUE 1 JST XH Connector Round Pads (Package) Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 2 Created by Rembrandt Electronics www.rembrandtelectronics.com >NAME >VALUE 1 JST XH Connector Long Pads (Package) Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 3 Created by Rembrandt Electronics www.rembrandtelectronics.com >NAME >VALUE 1 JST XH Connector Round Pads (Package) Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 3 Created by Rembrandt Electronics www.rembrandtelectronics.com >NAME >VALUE 1 >NAME >NAME >VALUE JST XH Connector 2 Pin Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 2 Created by Rembrandt Electronics www.rembrandtelectronics.com JST XH Connector 2 Pin Wire to board connector. Pitch: 2,54 mm, (0.100") Number of pins: 3 Created by Rembrandt Electronics www.rembrandtelectronics.com Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.