Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE >NAME RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE 1 >NAME >VALUE >NAME >VALUE >VALUE >NAME (Black) (Green) >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces PIN HEADER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL * * >Name * * >Name * * >Name >Name >Value Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.