<B>Wide Plastic Gull Wing Small Outline Package</B> >NAME >VALUE >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME 1 >NAME >VALUE >NAME ATtiny45 >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE (Black) (Green) >NAME >VALUE <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces <b>PIN HEADER</b> <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE <b>SUPPLY SYMBOL</b> <b>Allegro MicroSystems, Inc</b><p> www.allegromicro.com<br> <author>Created by librarian@cadsoft.de</author> <b>3-pin SOT23W</b> LH<p> Source: http://www.allegromicro.com/en/Products/Packaging/pkgso2.pdf >NAME >VALUE <b>Type: 3-pin SIP, conventional leadframe</b><p> Source: http://www.allegromicro.com/en/Products/Packaging/pkghall1.pdf >NAME >VALUE 3-pin SOT23W LH Source: http://www.allegromicro.com/en/Products/Packaging/pkgso2.pdf Type: 3-pin SIP, conventional leadframe Source: http://www.allegromicro.com/en/Products/Packaging/pkghall1.pdf >NAME >VALUE <b>Linear Hall Effect Sensor ICs</b><p> Continuous-Time Ratiometric<br> High-Temperature Operation<br> Programmable Linear with Analog Output<br> A1302 -Replacement- UGN3503 <br> Source: http://www.allegromicro.com/en/Products/Part_Numbers/1301/1301.pdf<br> http://www.allegromicro.com/en/Products/Part_Numbers/1321/1321.pdf<br> http://www.allegromicro.com/en/Products/Part_Numbers/1381/1381.pdf Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.