Skip to content

7. Electronics Design : Local Session#

  • Author : Asako Okazaki (Fablab Kamakura)
  • Date created : 2/21/2019
  • Last updated : 2/28/2019 (by Kai Naito)

Class site#

Electronics Design

Class video#

Fab-20190227D_Lesson06: electronics design from Academany on Vimeo.

Assignments & Goal#

Group assignment#

use the test equipment in your lab to observe the operation of a microcontroller circuit board

Individual Assignments#

redraw the echo hello-world board, add (at least) a button and LED (with current-limiting resistor) check the design rules, make it, and test it

extra credit: simulate its operation extra credit: render it

Learning outcomes#

  • Select and use software for circuit board design
  • Demonstrate workflows used in circuit board design

Have you?#

  • Shown your process using words/images/screenshots
  • Explained problems and how you fixed them, including how you worked with design rules for milling (DRC in EagleCad and KiCad)
  • Included original design files (Eagle, KiCad, Inkscape, .cad - whatever)

NB. Also, if you make a board and it doesn’t work; franken-hack that board (with jumper wires etc) until it does work, then make a new one with the knowledge you have gained.

Refer to Assessment page

補足:#

評価ポイント#

  • 個人課題:

    • Neilのサンプルをそのままトレースするのではなく、自分でデザインすること
    • できればKicadやkokoperiなど色々なツールを試してみる
    • テストプログラムの書き込みにElectric productionで作成したISPを使い、動作確認をし、ヒーローショットを撮っておくこと

Agenda#

Group assignment (3h)#

各ラボに置かれたテスト環境やツール(テスターやオシロスコープなど)を操作し、レポートする。

Individual Assignments (4h)#

  • echo hello boardに(少なくとも)スイッチ、LEDを付けたボードを作成する redraw the echo hello-world board, add (at least) a button and LED (with current-limiting resistor)
  • 空きポートPB2, PA7が利用できる
  • スイッチにはプルアップ、LEDには抵抗をつける
  • Attiny44 datasheet
  • Design Ruleの確認(EAGLEの場合はDRC機能:design rule checkをやればOK)

echo hello board resources#

How to use EAGLE#

For next week…#

“Mold&Casting”とMake something big”の課題に関してつくるもののアイディアを考えて置くこと!!!!!! / Start thinking what will you make for “Make something big” and “Mold&Casting”!!!!!!!!!!#

  • Recitaion:

    • on Monday 9:00 EST, 23:00 JST
  • Asia Regional Review:

    • on Tuesday 13:00-14:00 JST or 22:00-23:00 JST
    • video conference for meetings:
      https://bluejeans.com/fabevent/1248
  • Class on Wednesday 9:00 EST, 23:00J ST

Reference#