% (Header) (Generated by gcodetools from Inkscape.) (Using default header. To add your own header create file "header" in the output dir.) M3 (Header end.) G21 (All units in mm) (Start cutting path id: path4952) (Change tool to Default tool) G00 Z10.000000 G00 X26.454973 Y51.416523 G01 Z-0.125000 F100.0(Penetrate) G01 X26.454973 Y32.428680 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4952) (Start cutting path id: path4948) (Change tool to Default tool) G00 Z10.000000 G00 X37.975687 Y54.403377 G01 Z-0.125000 F100.0(Penetrate) G01 X27.948399 Y45.016127 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4948) (Start cutting path id: path4946) (Change tool to Default tool) G00 Z10.000000 G00 X18.347804 Y54.403377 G01 Z-0.125000 F100.0(Penetrate) G01 X37.975687 Y54.403377 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4946) (Start cutting path id: path4944) (Change tool to Default tool) G00 Z10.000000 G00 X23.468121 Y60.803773 G01 Z-0.125000 F100.0(Penetrate) G01 X33.068717 Y60.590426 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4944) (Start cutting path id: path4942) (Change tool to Default tool) G00 Z10.000000 G00 X29.228477 Y72.751180 G01 Z-0.125000 F100.0(Penetrate) G01 X44.802778 Y60.377080 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4942) (Start cutting path id: path4940) (Change tool to Default tool) G00 Z10.000000 G00 X29.228477 Y72.751180 G01 Z-0.125000 F100.0(Penetrate) G01 X11.734061 Y59.310347 Z-0.125000 F400.000000 G00 Z10.000000 (End cutting path id: path4940) (Footer) M5 G00 X0.0000 Y0.0000 M2 (Using default footer. To add your own footer create file "footer" in the output dir.) (end) %