1 >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE DIODE diameter 2.54 mm, horizontal, grid 10.16 mm >NAME >VALUE SMALL OUTLINE DIODE >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE LED >NAME >VALUE >NAME >VALUE PIN HEADER Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces LED zener diode USB Series A Hole Mounted >NAME PCB Edge USB Series A Surface Mounted >NAME USB Series B Surface Mounted >NAME USB Series Mini-B Hole Mounted >NAME USB Series Mini-B Surface Mounted >VALUE >NAME >Name >Value USB Series B Hole Mounted >NAME >VALUE USB Series B Hole Mounted >NAME >VALUE USB Series Mini-B Surface Mounted >NAME >VALUE USB USB Connectors USB-B-PTH is fully proven SKU : PRT-00139 USB-miniB is fully proven SKU : PRT-00587 USB-A-PCB is untested. USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437 USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up. USB-A-S has not been used/tested USB-MB-H has not been used/tested Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Fits EIAJ packages (wide version of the SOIC-8). >VALUE >NAME Dual In Line >VALUE >NAME >Value >Name Atmel 8-pin 2/4/8kB flash uC Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.