<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.3.0">
<drawing>
<board>
<plain>
<wire x1="15.24" y1="55.88" x2="34.29" y2="55.88" width="0" layer="20"/>
<wire x1="34.29" y1="55.88" x2="36.83" y2="60.96" width="0" layer="20"/>
<wire x1="36.83" y1="60.96" x2="90.17" y2="60.96" width="0" layer="20"/>
<wire x1="90.17" y1="60.96" x2="90.17" y2="35.56" width="0" layer="20"/>
<wire x1="90.17" y1="35.56" x2="36.83" y2="35.56" width="0" layer="20"/>
<wire x1="15.24" y1="55.88" x2="15.24" y2="40.64" width="0" layer="20"/>
<wire x1="15.24" y1="40.64" x2="34.29" y2="40.64" width="0" layer="20"/>
<wire x1="34.29" y1="40.64" x2="36.83" y2="35.56" width="0" layer="20"/>
</plain>
<libraries>
<library name="SparkFun-DigitalIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SO08-EIAJ">
<description>Fits EIAJ packages (wide version of the SOIC-8).</description>
</package>
</packages>
</library>
<library name="fab">
<packages>
<package name="SOD123">
<description>&lt;b&gt;SMALL OUTLINE DIODE&lt;/b&gt;</description>
</package>
<package name="2X03SMD">
</package>
<package name="C1206">
<description>&lt;b&gt;CAPACITOR&lt;/b&gt;</description>
</package>
<package name="LED1206FAB">
<description>LED1206 FAB style (smaller pads to allow trace between)</description>
</package>
<package name="R1206">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="usb">
<packages>
<package name="USB-A-PCB">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="CHIP1" library="SparkFun-DigitalIC" package="SO08-EIAJ" value="ATTINY45">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D1" library="fab" package="SOD123" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D2" library="fab" package="SOD123" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="PIN" library="fab" package="2X03SMD" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="POW_C" library="fab" package="C1206" value="100nF">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="POW_LED" library="fab" package="LED1206FAB" value="RED">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="POW_RES" library="fab" package="R1206" value="150">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="TLED" library="fab" package="LED1206FAB" value="GREEN">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="TRES" library="fab" package="R1206" value="150">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="USB_M" library="fab" package="R1206" value="47">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="USB_M_BUS1" library="fab" package="R1206" value="470">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="USB_M_BUS2" library="fab" package="R1206" value="1K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="USB_P" library="fab" package="R1206" value="47">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="X1" library="usb" package="USB-A-PCB" value="USBPCB">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="GND">
<contactref element="POW_C" pad="2"/>
<contactref element="POW_RES" pad="1"/>
<contactref element="X1" pad="GND"/>
<contactref element="PIN" pad="6"/>
<contactref element="CHIP1" pad="4"/>
<contactref element="TRES" pad="2"/>
<contactref element="D1" pad="ANODE"/>
<contactref element="D2" pad="ANODE"/>
</signal>
<signal name="VCC">
<contactref element="USB_M_BUS2" pad="1"/>
<contactref element="POW_C" pad="1"/>
<contactref element="POW_LED" pad="1"/>
<contactref element="X1" pad="5V"/>
<contactref element="PIN" pad="2"/>
<contactref element="CHIP1" pad="8"/>
</signal>
<signal name="POWLED">
<contactref element="POW_LED" pad="2"/>
<contactref element="POW_RES" pad="2"/>
</signal>
<signal name="MOSI">
<contactref element="CHIP1" pad="5"/>
<contactref element="PIN" pad="4"/>
<contactref element="TLED" pad="1"/>
</signal>
<signal name="MISO">
<contactref element="PIN" pad="1"/>
<contactref element="CHIP1" pad="6"/>
</signal>
<signal name="PB2">
<contactref element="CHIP1" pad="7"/>
<contactref element="PIN" pad="3"/>
</signal>
<signal name="PB5">
<contactref element="PIN" pad="5"/>
<contactref element="CHIP1" pad="1"/>
</signal>
<signal name="PB4">
<contactref element="CHIP1" pad="3"/>
<contactref element="USB_P" pad="1"/>
</signal>
<signal name="PB3">
<contactref element="CHIP1" pad="2"/>
<contactref element="USB_M" pad="1"/>
</signal>
<signal name="TLED">
<contactref element="TRES" pad="1"/>
<contactref element="TLED" pad="2"/>
</signal>
<signal name="USB_P">
<contactref element="USB_P" pad="2"/>
<contactref element="D2" pad="CATHODE"/>
<contactref element="X1" pad="USB_P"/>
</signal>
<signal name="BUS">
<contactref element="USB_M_BUS2" pad="2"/>
<contactref element="USB_M_BUS1" pad="1"/>
</signal>
<signal name="USB_M">
<contactref element="X1" pad="USB_M"/>
<contactref element="D1" pad="CATHODE"/>
<contactref element="USB_M" pad="2"/>
<contactref element="USB_M_BUS1" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
