<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 2x20 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:40</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Dev/RaspberryPi/B-D-xx1X.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_20x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x20 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:40</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://sullinscorp.com/catalogs/145_PAGE118_.100_SBH11_SERIES_MALE_BOX_HDR_ST_RA_SMT.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_20x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x20</h3>
<p>Specifications:
<ul><li>Pin count:40</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_20x2</li>
</ul></p>>NAME>VALUEPlated Through Hole - 2x20 Shrouded Header
Specifications:
Pin count:40
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_20x2
Surface Mount - 2x20 Shrouded Header
Specifications:
Pin count:40
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_20x2
Plated Through Hole - 2x20
Specifications:
Pin count:40
Pin pitch:0.1"
Example device(s):
CONN_20x2
>Name>Value<h3>Raspberry Pi GPIO Header</h3>
<p>2x20 pin connector, as found on B, B+, A+ models. Both shrouded PTH and SMT versions available.</p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/13054”>GPIO Shrouded Header</a>- PTH</li>
<li><a href=”https://www.sparkfun.com/products/13717”>SparkFun Pi Wedge (Preassembled)</a></li>
</ul></p>>NAME>VALUE<b>SOT-223</b>>NAME>VALUE<h3>Crystal (no ground pin)</h3>>NAME>VALUE12Tie /SHDN to VIN if not needed.
Optional 470pF cap at BYPASS reduces noise.<h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEEIA 7343 tantalum capacitor>Name>Value2.5 mm spaced PTHs with 6.5 mm diameter outline>Value>NameSome old package in our library>NAME>VALUE<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>>NAME>VALUE<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>>NAME>VALUEGeneric 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.EIA 7343 tantalum capacitor2.5 mm spaced PTHs with 6.5 mm diameter outlineSome old package in our libraryPanasonic Aluminium Electrolytic Capacitor VS-Serie Package EPanasonic Aluminium Electrolytic Capacitor VS-Serie Package E>NAME>VALUE>NAME>VALUE<h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>18pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>470pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>100µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>22µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>SparkFun Communication ICs</h3>
This is the communications library, which contains things that exist on wired busses. This includes USB to serial conversion ICs, like the FTDI line, plus high speed line drivers, level shifters, bus drivers, CAN transceivers and ethernet PHYs.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>TSSOP (Thin Shrink Small Outline Plastic) - 14</h3>
<p>Specifications:
<ul><li>Pin count:14</li>
</ul></p>
<p>Example device(s):
<ul><li>TXB0104PWR</li>
</ul></p>>NAME>VALUE<h3>SOIC - 14</h3>
<p>Specifications:
<ul><li>Pin count:14</li>
</ul></p>
<p>Example device(s):
<ul><li>TXB0104PWR</li>
</ul></p>>NAME>VALUETSSOP (Thin Shrink Small Outline Plastic) - 14
Specifications:
Pin count:14
Example device(s):
TXB0104PWR
SOIC - 14
Specifications:
Pin count:14
Example device(s):
TXB0104PWR
>NAME>VALUE1.2-3.6V1.65-5.5VVCCA ≤ VCCB<h3>4-Bit Bi-Directional Level Shifter</h3>
<ul>
<li>1.2V-3.6V (VCCA) to 1.65V-5.5V (VCCB) bi-directional level shifter with auto direction sensing.</li>
<li>Max data rate - VCCA 1.8V: 20Mbps (50ns), VCCA 3.3V: 100Mbps (10ns)</li>
<li>Digikey: 296-21929-1-ND (TSSOP)</li>
</ul>
<p><a href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/txb0104.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/13120">SparkFun Cellular Shield - MG2639</a> (CEL-13120)</li>
<li><a href="https://www.sparkfun.com/products/13743">SparkFun Level Shifting microSD Breakout</a> (DEV-13743)</li>
<li><a href="https://www.sparkfun.com/products/11771">SparkFun Voltage-Level Translator Breakout - TXB0104</a> (BOB-11771)</li>
<li><a href="https://www.sparkfun.com/products/13040">SparkFun Block for Intel® Edison - UART</a> (DEV-13040)</li>
<li><a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a> (DEV-13036)</li>
</ul><b>PIN HEADER</b>>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUE>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>PIN HEADER</b><b>PIN HEADER</b><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.1
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.AXIAL-0.1-KIT
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUE<h3>10kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author><b>Solder jumper</b>>NAME>VALUE<b>Solder jumper</b>>NAME>VALUESolder jumperSolder jumper>NAME>VALUESMD solder <b>JUMPER</b><h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUELED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUELED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Area: 0.125" x 0.06"
Example device(s):
LED<h3>LED</h3>
<p></p>>NAME>VALUE<h3>Green SMD LED</h3>
<p>Used in manufacturing of various products at SparkFun</p>
<p><b>Packages:</b>
<ul><li><b>0603</b> - SMD 0603 package <a href="http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/9894312-LTST-C190GKT.aspx?CrossPart=HSMG-C190&IM=0">[Product Link]</li>
<li><b>LilyPad 1206</b> - SMD1206 LilyPad package <a href="http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=IN150NGHARVATEKCORPORATION2049943&IM=0">[Product Link]</li>
<li><b> 1206</b> - SMD1206 package <a href=http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/8315665-LTST-C150KGKT.aspx?IM=0">[Product Link]</li>
<li><b> 1206 Bottom Mount</b> -SMD 1206 Bottom Mount <a href=http://www.digikey.com/product-detail/en/lite-on-inc/LTST-C230KGKT/160-1456-1-ND/386854">[Product Link]</li>
<ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/821”>Pro Mini 328 -5V</a></li>
<li><a href=”https://www.sparkfun.com/products/12757”>RedBoard</a></li>
<li><a href=”https://www.sparkfun.com/products/13720”>MP3 Trigger</a></li>
<li><a href=”https://www.sparkfun.com/products/11076”>Makey Makey</a></li>
</ul></p><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUE<h3>470Ω resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a></p>>Name>ValueMomentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet<h3>Momentary Switch (Pushbutton) - SPST - Two Circuits</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Schematic symbol includes two switch circuits.</p>>NAME>VALUE<h3>Momentary Switch (Pushbutton) - SPST - Two Circuits</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Schematic symbol includes two switch circuits.</p>
<h4>Variants</h4>
<ul>
<li><b>SMD-4.6MMX2.8MM</b> - 4.60mm x 2.80mm Tactile Momentary Button Switch - Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li>
<li><b>SMD-5.2MM</b> - <a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> - Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li>
</ul>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.