<b>64-Lead Low Profile Quad Flat Package [LQFP] (ST-64-2)</b><p>
COMPLIANT TO JEDEC STANDARDS MS-026-BCD<br>
Source: http://www.analog.com/UploadedFiles/Data_Sheets/288945048AD7C7019_20_1_2_4_5_6_7_0.pdf>NAME>VALUE<b>LP Package, 28-Pin TSSOP with Exposed Thermal Pad</b><p>
Source: http://allegromicro.com/datafile/3979.pdf>NAME>VALUE<b>LP Package, 28-Pin TSSOP with Exposed Thermal Pad</b><p>
Source: http://allegromicro.com/datafile/3979.pdf>NAME>VALUEGeneric EIA 3528 polarized tantalum capacitor>NAME>VALUE<h3>Momentary Switch (Pushbutton) - SPST - Two Circuits</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Schematic symbol includes two switch circuits.</p>>NAME>VALUE>NAME>VALUETie /SHDN to VIN if not needed.
Optional 470pF cap at BYPASS reduces noise.<h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>5x3.2mm SMD Crystal</h3>
<p>Example: <a href="https://www.sparkfun.com/products/94">16MHz SMD Crystal</a> (<a href="https://www.sparkfun.com/datasheets/Components/SPK-5032-16MHZ.pdf">Datasheet</a>)</p>>NAME>VALUE<h3>HC49/US 11.6x4.6mm PTH Crystal</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE5x3.2mm SMD Crystal
Example: 16MHz SMD Crystal (Datasheet)HC49/US 11.6x4.6mm PTH Crystal
Example Datasheet<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>16MHz Crystal</h3>
<p><a href="http://www.digikey.com/product-search/en?keywords=535-9122-1-ND">Digikey Example</a></p>
<p><ul><li>Frequency: 16MHz</li>
<li>Frequency Stability: ±50ppm</li>
<li>Frequency Tolerance: ±20ppm</li>
<li>Load Capacitance: 18pF</li></ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/12640”>Pro Micro -5V/16MHz</a></li>
<li><a href=”https://www.sparkfun.com/products/10097”>SparkFun Serial Enabled LCD Kit</a></li>
</ul></p><h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric EIA 3216 (1206) polarized tantalum capacitor>NAME>VALUE<p><b>Polarized 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric EIA 3528 polarized tantalum capacitor>NAME>VALUE2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask>Name>Value2.5 mm spaced PTHs with top copper masked>Name>ValueMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion<br />
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdf>Name>Value<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE2 PTH spaced 10mm apart>Name>ValueGeneric 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic EIA 3216 (1206) polarized tantalum capacitorPolarized 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic EIA 3528 polarized tantalum capacitor2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask2.5 mm spaced PTHs with top copper maskedMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdfGeneric 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.2 PTH spaced 10mm apart>NAME>VALUE>NAME>VALUE<h3>18pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>4.7µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>10.0µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>470pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>0.01uF/10nF/10,000pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p>
CAP-09321<b>PIN HEADER</b>>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>PIN HEADER</b><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.1
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.AXIAL-0.1-KIT
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUE<h3>10kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>1kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>22kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>47kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>5.6kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>470Ω resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>SparkFun Discrete Semiconductors</h3>
This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.SOD-323 (Small Outline Diode)>NAME>VALUEFrom http://www.semicon.panasonic.co.jp/ds4/DZ2J150_E.pdf>NAME>VALUESOD-323 (Small Outline Diode)From http://www.semicon.panasonic.co.jp/ds4/DZ2J150_E.pdf<h3>Zener Diode</h3>
Allows current flow in one direction, but allows reverse flow when above breakdown voltage.>NAME>VALUE<h3>Zener Diode</h3>
<p>A Zener diode allows current to flow from its anode to its cathode like a normal semiconductor diode, but it also permits current to flow in the reverse direction when its "Zener voltage" is reached. - WIkipedia</p><h3>SparkFun Coils</h3>
In this library you'll find magnetics.
<p><b>SparkFun Products:</b>
<ul><li>Inductors</li>
<li>Ferrite Beads</li>
<li>Transformers</li>
</ul></p>
<br>
<p>We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</p><h3>4600 series footprint</h3>
<p>Not messing with it since production uses it. Origin unknown but loosely based on this <a href="http://www.murata-ps.com/data/magnetics/kmp_4600.pdf">datasheet</a>.</p>>NAME>VALUE<h3>SRN6045 series footprint</h3>
<p>Roughly based on the recommendation in this <a href="http://www.mouser.com/ds/2/54/RN6045-778135.pdf">datasheet</a>.</p>>NAME>VALUE<h3>CDRH2D18/HPNP footprint</h3>
<p>Recommended footprint for CDRH2D18/HPNP series inductors from <a href="http://products.sumida.com/products/pdf/CDRH2D18HP.pdf">here</a>.</p>>NAME>VALUE<h3>SDR1307 series footprint</h3>
<p>Footprint based on recommendation from <a href="https://www.bourns.com/pdfs/SDR1307.pdf">here</a>.</p>>NAME>VALUE<h3>CR54 footprint</h3>
<p>These vary by manufacturer, but we used the NPIS54LS footprint from <a href="http://www.niccomp.com/catalog/npis_ls.pdf">here</a>.>Name>Value<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE>NAME>VALUE4600 series footprint
Not messing with it since production uses it. Origin unknown but loosely based on this datasheet.SRN6045 series footprint
Roughly based on the recommendation in this datasheet.CDRH2D18/HPNP footprint
Recommended footprint for CDRH2D18/HPNP series inductors from here.SDR1307 series footprint
Footprint based on recommendation from here.CR54 footprint
These vary by manufacturer, but we used the NPIS54LS footprint from here.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.<h3>Inductors</h3>
<p>Resist changes in electrical current. Basically a coil of wire.</p>>NAME>VALUE<h3>Inductors</h3>
<p>Resist changes in electrical current. Basically a coil of wire.</p>
<p>SparkFun Products:
<ul><li><a href="https://www.sparkfun.com/products/13879">SparkFun Load Cell Amplifier - HX711</a></li>
<li><a href="https://www.sparkfun.com/products/13613">IOIO-OTG - V2.2</a></li>
<li><a href=""></a></li>
</ul></p>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>SMALL OUTLINE DIODE</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces<B>DIODE</B><p>
high speed (Philips)<b>Single Pads</b><p>
<author>Created by librarian@cadsoft.de</author><b>THROUGH-HOLE PAD</b>>NAME>VALUETHROUGH-HOLE PAD>NAME>VALUE<b>THROUGH-HOLE PAD</b><h3>SparkFun Communication ICs</h3>
This is the communications library, which contains things that exist on wired busses. This includes USB to serial conversion ICs, like the FTDI line, plus high speed line drivers, level shifters, bus drivers, CAN transceivers and ethernet PHYs.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>TSSOP (Thin Shrink Small Outline Plastic) - 14</h3>
<p>Specifications:
<ul><li>Pin count:14</li>
</ul></p>
<p>Example device(s):
<ul><li>TXB0104PWR</li>
</ul></p>>NAME>VALUE<h3>SOIC - 14</h3>
<p>Specifications:
<ul><li>Pin count:14</li>
</ul></p>
<p>Example device(s):
<ul><li>TXB0104PWR</li>
</ul></p>>NAME>VALUETSSOP (Thin Shrink Small Outline Plastic) - 14
Specifications:
Pin count:14
Example device(s):
TXB0104PWR
SOIC - 14
Specifications:
Pin count:14
Example device(s):
TXB0104PWR
>NAME>VALUE1.2-3.6V1.65-5.5VVCCA ≤ VCCB<h3>4-Bit Bi-Directional Level Shifter</h3>
<ul>
<li>1.2V-3.6V (VCCA) to 1.65V-5.5V (VCCB) bi-directional level shifter with auto direction sensing.</li>
<li>Max data rate - VCCA 1.8V: 20Mbps (50ns), VCCA 3.3V: 100Mbps (10ns)</li>
<li>Digikey: 296-21929-1-ND (TSSOP)</li>
</ul>
<p><a href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/txb0104.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/13120">SparkFun Cellular Shield - MG2639</a> (CEL-13120)</li>
<li><a href="https://www.sparkfun.com/products/13743">SparkFun Level Shifting microSD Breakout</a> (DEV-13743)</li>
<li><a href="https://www.sparkfun.com/products/11771">SparkFun Voltage-Level Translator Breakout - TXB0104</a> (BOB-11771)</li>
<li><a href="https://www.sparkfun.com/products/13040">SparkFun Block for Intel® Edison - UART</a> (DEV-13040)</li>
<li><a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a> (DEV-13036)</li>
</ul><b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author><b>Solder jumper</b>>NAME>VALUE<b>Solder jumper</b>>NAME>VALUESolder jumperSolder jumper>NAME>VALUESMD solder <b>JUMPER</b><h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUELED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUELED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Area: 0.125" x 0.06"
Example device(s):
LED<h3>LED</h3>
<p></p>>NAME>VALUE<h3>Green SMD LED</h3>
<p>Used in manufacturing of various products at SparkFun</p>
<p><b>Packages:</b>
<ul><li><b>0603</b> - SMD 0603 package <a href="http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/9894312-LTST-C190GKT.aspx?CrossPart=HSMG-C190&IM=0">[Product Link]</li>
<li><b>LilyPad 1206</b> - SMD1206 LilyPad package <a href="http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=IN150NGHARVATEKCORPORATION2049943&IM=0">[Product Link]</li>
<li><b> 1206</b> - SMD1206 package <a href=http://www.futureelectronics.com/en/technologies/semiconductors/optoelectronics/leds/Pages/8315665-LTST-C150KGKT.aspx?IM=0">[Product Link]</li>
<li><b> 1206 Bottom Mount</b> -SMD 1206 Bottom Mount <a href=http://www.digikey.com/product-detail/en/lite-on-inc/LTST-C230KGKT/160-1456-1-ND/386854">[Product Link]</li>
<ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/821”>Pro Mini 328 -5V</a></li>
<li><a href=”https://www.sparkfun.com/products/12757”>RedBoard</a></li>
<li><a href=”https://www.sparkfun.com/products/13720”>MP3 Trigger</a></li>
<li><a href=”https://www.sparkfun.com/products/11076”>Makey Makey</a></li>
</ul></p><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p><h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE2 pin poke-home connector
part number 2062-2P from STA>NAME>VALUE>NAME>VALUEPlated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STA<h3>2 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.