<b>Fablab Library</b>
<p>This library contains many components found on Fablab's inventory.</p>
LED 1206 pads (standard pattern)
>NAME
>VALUE
LED1206 FAB style (smaller pads to allow trace between)
>NAME
>VALUE
5mm round through hole part.
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
>NAME
>VALUE
<p>Resistence: 0.250 Ohm
<p>Technical specifications:
<ul>
<li>Power rating @ 70°C: 1 W
<li>Dielectric withstanding voltage: 200 V
</ul>
<p>Manufacturer: Stackpole Electronics Inc.
<p>Digikey code: CSRN2010FKR250CT-ND
<p><a href="https://www.seielect.com/Catalog/SEI-CSR_CSRN.pdf">Datasheet</a>
>NAME
>VALUE
<p>Digikey code: SW261CT-ND
<p><a href="http://omronfs.omron.com/en_US/ecb/products/pdf/en-b3sn.pdf">Datasheet</a>
</p>
>NAME
LED 1206 pads (standard pattern)
LED1206 FAB style (smaller pads to allow trace between)
5mm round through hole part.
<b>RESISTOR</b>
<b>RESISTOR</b><p>
wave soldering
<p>Resistence: 0.250 Ohm
<p>Technical specifications:
<ul>
<li>Power rating @ 70°C: 1 W
<li>Dielectric withstanding voltage: 200 V
</ul>
<p>Manufacturer: Stackpole Electronics Inc.
<p>Digikey code: CSRN2010FKR250CT-ND
<p><a href="https://www.seielect.com/Catalog/SEI-CSR_CSRN.pdf">Datasheet</a>
<p>Digikey code: SW261CT-ND
<p><a href="http://omronfs.omron.com/en_US/ecb/products/pdf/en-b3sn.pdf">Datasheet</a>
</p>
LED
>NAME
>VALUE
>NAME
>VALUE
>NAME
LED
<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces
<b>Sealed Tactile Switch (SMT)</b>
<p>Technical specifications:
<ul>
<li>Rated voltage: 3 to 24 VDC
<li>Rated current: 1 to 50 mA
<li>Operating temperatue: -25 to 70°C
</ul>
<p>Manufacturer: Omron
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.