Wide Plastic Gull Wing Small Outline Package >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 1 >NAME >VALUE Power TOPLED® Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf >NAME >VALUE R G B A SOT 23 >NAME >VALUE Wide Plastic Gull Wing Small Outline Package RESISTOR RESISTOR wave soldering CAPACITOR CAPACITOR PIN HEADER Power TOPLED® Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf SOT 23 >NAME ATtiny45 >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.