vcc
mosi
gnd
miso
sck
rst
1
6
ftdi 3.3v
reset
ch pd enable
off
on
gpio4
button
PIN-MODE
<b>OMRON SWITCH</b>
>NAME
>VALUE
1
2
3
4
>NAME
>VALUE
1
>NAME
>VALUE
LED1206 FAB style (smaller pads to allow trace between)
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>SMALL OUTLINE DIODE</b>
>NAME
>VALUE
>NAME
>VALUE
1
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
*
*
>Name
ESP8266 Module 12E
ESP - 12E
>Value
>Name
<b>Single Pads</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>SMD PAD</b>
>VALUE
>NAME
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>EAGLE Design Rules</b>
<p>
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.