#include <SoftwareSerial.h>
SoftwareSerial mySerial(2, 3); //pins to which RX and TX are connected

int bluelightsensePin = 6; // light sensor on pin 1
int val1 = 0; // variable to store the value read


int bluecapsensePin = 1; 
int val2 = 0; 

void setup() 
{
  mySerial.begin(9600); 
}

void loop ()
{
val1 = analogRead(bluelightsensePin);               
val2 = analogRead(bluecapsensePin); 

val1 = map(val1, 10, 1023, 128, 255);
val2 = map(val2, 0, 694, 0, 127);
  
mySerial.println (val1);
delay(500);
mySerial.println (val2);  

//mySerial.write(val1);
//delay(3000);
//mySerial.write(val2);  
}